Our company introduce:
Qingdao XINSA machinery manufacturing co., Ltd, manufacturer of surface cleaning equipment ,the productions of our main products,include Q69 series steel profiles shot blasting machine,QG series inner and outer wall special shot blasting machine,Q38,Q48,Q58 series hanging chain & piled and released chain type shot blasting machine,QWD mesh belt shot blasting machine,Q37 series hook type shot blasting machine,Q32 series tumble belt shot blasting machine,mobile type road surface shot blasting machine,automatic recycling sand blasting room,trolley type shot blasting machine etc.We are one of the biggest collection of surface cleaning equipments and foundry machinery company in the Shandong province china, That is widely used in the founding machinery,anti-corrosive and thermal insulated machinery,mining machinery,construction machinery and engineering machinery and so on,our company provide high quality service to those company.
All products are designed with CAD computer aided design, which can provide cost-effective products for foundry, metallurgy, automobile, shipbuilding, construction, mining machinery and engineering machinery, and can design and manufacture all kinds of non-standard special casting machinery according to the needs of users.
Our sand blasting cleaning system introduce:
Our sand blasting room is a pit free air recovery structure, which is directly installed on the cement floor.The working floor of the house is about 380mm high from the ground.The shell is 50mm thick fireproof rock
wool colored steel house.Rectangular tube frame in the middle,4mm wear-resistant rubber board hanging inside.
Hollow flat car bearing 5 tons, manually propelled (if the weight exceeds 5 tons,it will be pulled by the hoist).
Filter cartridge dust remover, chimney height 15 meters.
Sand blasting room features:
Automatic recycling sand blasting room is designed according to the product processing process and the product characteristic,it is mainly used for large forgings and castings welded steel structure,engineering machinery,industrial boilers,chemical machinery,ship building,etc,to remove surface oxide skin,rust,and strengthen surface,to improve the coating adhesion,etc.
This type machine is mainly composed of five parts:
Sand blasting chamber
Sand blasting system
Sand recycling system
Ventilation and dust removal system
Lighting and electrical control system
The external air supplement inlet is arranged on the top of the environment-friendly pneumatic recovery sand blasting chamber, the purpose of which is to make the suction and dust removal system of the whole sand blasting room form a self-circulation state, so that the room body is always in a state of slight negative pressure when it works inside. Make sure the dust won't leak out.
The inlet is designed as a filter structure. During sand blasting operation, the external air entering from the air inlet is evenly distributed to the whole horizontal section of the sand blasting chamber, moving from top to bottom, so that the velocity of the horizontal cross section of the sand blasting chamber is uniform. At the same time, the sand can not be spattered through the air inlet to the outside of the sandblasting chamber.
Appearance of sandblasting room:
The shell of XINSA shot peening cleaning chamber is made of composite colored steel plate and section steel. It is a solid, sealed and spacious operating space for shot peening cleaning of workpieces. Shot peening cleaning chamber is composed of left and right side wall, rear side wall, roof plate, rubber guard plate, gate and so on. A total of 10 sets of led lamps (protected by toughened glass) are installed in the peening cleaning room.
Sand recycling system:
The bottom of the sandblasting room is the area where abrasive is collected and the cleaning line is arranged, which is specially used to collect the abrasive scattered during sandblasting and the dust produced during sandblasting. In this scheme, the sealed inverted "v" shape is made of steel plate in the sand collecting area, which is beneficial to the recovery and collection of abrasive and dust.
Trolley transportation system:
It is transported by flat car and carries a load of 5 tons. Because the weight of the workpiece is light, the flat car is manually pushed into the cleaning room to receive shot peening. The track uses 30# round standard rails, and each wheel is equipped with a polyurethane scraper on the front to scrape the scattered projectiles above the rails.
We also can design and manufacture all kind of non-standard sand blasting room according to customer's different workpiece detail requirement,weight and productivity.
This type sand blasting system's technical parameter:
| Item | Unit | Numerical value | |||
| Inner measurement of sand blasting room | Length×width×height | mm | 18000×7000×6000 | ||
| Sand blasting door dimensions | Width×height | mm | 3000×3000 | ||
| Cleaning workpiece speed | External surface of profiled structural parts | sq.m./h | 20-30(A-D grade according the different cleaning requirements of original Surface material and workpiece | ||
| Cleaning quality rank | Reach Sa2 .5 rank | ||||
| Processing material and strength range | Q235/Q345/65Mn/HT/ZG etc. | ||||
| Surface roughness | μ | 40~75depend on the shot ball's size | |||
| Total power | kw | about 56.5 | |||
| Compressed air consumption | m³/min | 6,each spraying gun need 5 m³/min,protecting air-condition and the back flush dust cleaning need 1 m³/min | |||
| Compressed air pressure | MPa | 0.5-0.7 | |||
| Facility adaptive temperature | Suitable for local four seasons normal temperature | ||||
| Control system | electrical appliance control system | Manual button control | |||
| Ground pit requirement | Have no pit, waterproof | ||||
| Overall noise | dB | ≤95 | |||
| Dust discharge concentration | mg/m3 | 80mg/m3excel the 80mg/m3 of the GB16297-1996<emission standard of air pollutants> | |||
| Dust content in the air after cleaned | mg/m3 | 10 | |||
Application case:
Qingdao xinsa machinery manufacturing Co., Ltd,independent R&D design this pneumatic recovery sand blasting room without foundation pit.the only one that owns this technology of pitless sandblasting room in the word.
Comparison of Environmental Protection Pneumatic recovery Sand blasting room's characteristics with Mechanical Recycling Sandblasting room.
1,Low cost of integrated operation and energy saving.
Pneumatic recovery Sandblasting room mode with no transmission mechanism is adopted, and the failure rate is low and maintenance is free. Reduce the maintenance time of the shutdown, and reduce the loss caused by the shutdown and maintenance;
2,the honeycomb floor has a sand-back structure without digging pit, and the civil engineering cost and the construction period are greatly reduced;
3,The structure is simplified and the interlocking control can be used in each system control, which greatly improves the convenience of maintenance and repair.
4,The key wear parts are equipped with standard modules, which are easy to maintain and replace, thus avoiding heavy maintenance work.
5,The sandblasting chamber adopts the upper supplementary air, the lower part and the side part can carry on the dust suppression circulation mode. The dust always drains downward, the visibility in the room is high, the working environment is good, the quality and efficiency of sand blasting are guaranteed, and the physical and mental health of the workers is protected.
6,The whole sand absorbing floor can recover all the sand materials in an instant, and there is no residual sand material on the ground. The sand blasting room is clean and clean in the room, no manual cleaning is required, and the working time is saved. Pneumatic pipe back sand, abrasive recovery up to 99, easy to clean the abrasive. Traditional mechanical recovery (or scrape floor) sandblasting room is almost impossible to thoroughly clean and replace abrasives.
7,The body of sandblasting room is simple and beautiful, and the installation is convenient and flexible.
8,The whole technical performance of sandblasting room is advanced, dust emission meets and is lower than the national and local environmental protection requirements, and the environmental pollution is completely eliminated.
Related products:
Notice:
According to your requirements, the most suitable machine will be designed for your workpieces, please indicate the following details.
1. What kind of workpiece you clean?
2. The workpiece size, length, width, height and weight of maximum workpiece.
3. What's your production capacity per day (8 hours)?
4. It's my pleasure if you can provide details workpiece photos to us.
Based on these details information, the detailed technical proposals will be sent to you for reference.
Perfect after-sales service system :
1. Installation and commissioning issue: We will send one technicians to assist with machine installation and commissioning, customer pays for return tickets, hotel and diet. Customer need arrange skilled worker and prepare various installation machinery and tools.
2. Warranty time:12 months from date of commissioning completion, but no more than 18 months from date of delivery.
3.We will interview the customers one time every year,the visit time is 2 years.
4.When quanlity problems occur,our company will do between 24 hours as follows:
* Reply by email or online chat tool.
* Send excellent technicist to maintain,and obey"The problem will not be corrected and not withdrawn".
5. The seller should offer the best lifetime service and accessories maintenance.
6.Timely offer the technical and maintenance improving information.
Trade Information:
Trade Terms | FOB |
MOQ | Our MOQ is 1 set. |
Port | QINGDAO CHINA |
Shipment | BY SEA /AIR |
Payment Terms | T/T or L/C |
Payment condition | 30% deposit before production,70% balance need to pay before delivery. |
Supply Capability | 40 units/month |
Sample Availability | Yes ,But Need to charge a sample fee and all freight(Inland freight +seafreight) covered by buyer |
Sample Time | 5-10days(depends on whether have in stock) |
Lead Time | 25-30 days(Rush season 5-10days longer) |
Packing | Wooden frame&Carton |
Delivery time | 15-35days shipping time (depends on destination position) |
Any question pls kindly contact with us and welcome to visit our factory!
Qingdao Xinsa Machinery Manufacturing Co.,Ltd.
Sale manager:Alina
Tel:86-532-84126287
Fax:86-532-88138103
Cell:86-18563913196
http://qdxinsa.en.made-in-china.com/